Your equipment is working with both heat and high pressure and water in most cases. Most coin operated vacuums have two motors in the top and are usually good for about 400 hours. They are easily accessed and not expensive. If one goes out, it is likely the other will shortly after. One common part to address is the carbon brushes. These will cause the motors to fail prematurely. Inspection of the carbon brushes is suggested at least every two months. It is a good idea to have some spares so you don’t lose any revenue. It is not uncommon to burn through a vacuum motor each 45-60 days, especially in you have 4-6 bays in your facility. When checking your brushes, also make sure the vacuum motors are secured. A loose motor can cause poor suction due to the motor impeller not being centered over the inlet. If the pressure is down, check your vacuum hoses for possible holes.
Another possible cause is if the trap door is ajar, but sometimes the motor will need replacing. If you find dirt around the vacuum motor, check to see if the filter bag is torn or not seated right. Proper maintenance and care will ensure continuous operation and revenue. Check your owner’s manual to ensure proper matches of the replacement motor before ordering.
Weight: 5 lbs.

• Is Discontinued By Manufacturer ‏ : ‎ No
• Product Dimensions ‏ : ‎ 6 x 7 x 6 inches; 5.5 Pounds
• Date First Available ‏ : ‎ March 28, 2018
• Manufacturer ‏ : ‎ Ultimate Washer
• Country of Origin ‏ : ‎ USA